Room Monitor - Radio Shack 43-143 Owner's Manual

Beyond the Basics
Answering an Intercom Page
When the intercom page tone sounds, the display will show the
ID of the station that is paging.
1. To answer an intercom page:
HANDSET:
BASE:
2. To hang up an intercom conversation:
HANDSET:
BASE:
Room Monitor
This feature allows you to monitor sounds in another room. Place
a station in the room you wish to monitor; it will function as a
microphone to pick up sound. Any station can be set to function
as a remote speaker, allowing you to monitor sounds in the other
room. You can set up this feature from either a handset or the base.
1. When the phone is in standby, press the MENU soft key.
2. Select ROOM MONITOR menu. TO WHICH UNIT? appears.
3. Select the station you want to monitor by using
Then, press the OK soft key.
4. MONITORING appears on the initiating station and MONITOR
appears on the monitored station, and sound monitoring is
effective immediately.
UP841BH_43-143_OM3.indd 64
Press /FLASH, INT'COM/HOLD, or the
ANSWER soft key. If Auto Talk is on, the
handset will answer when you pick up the
handset from the charger. If Any Key Answer is
on, you can also press a number key, /TONE,
or #.
Press , INT'COM/HOLD, or the ANSWER
soft key, or pick up the corded handset from
the base.
Press or the END soft key, or return the
handset to the charger.
Press INT'COM/HOLD or the END soft key, or
return the corded handset to the base.

or .
12/19/2006 6:55:25 PM