Using Page/Intercom - Radio Shack ET-687 Owner's Manual

43-687.fm Page 19 Friday, August 13, 1999 11:12 AM
3. When the service answers, press
( ). Any additional numbers
TONE
you dial are sent as tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the ET-687 as a two-way
pager and intercom between the base and
the handset. This is useful if the handset is
away from the base and you want to lo-
cate it, or if you want to have a conversa-
tion between someone with the handset
and someone at the base.
To page the base from the handset,
press . The base and handset
INTCM
ring. Press
INTERCOM
swer the page. Both line indicators on
the handset light, and the CHARGE indi-
cator on the base lights.
To page the handset from the base,
press
ring. Press
swer the page. Both line indicators on
the handset light, and the CHARGE indi-
cator on the base lights.
To end an intercom call, press
the handset, press
base, or hang up the handset.
During a call, you can page someone at
the base or the handset. Press
COM
handset). The current call is put on hold.
on the base to an-
Notes:
The handset and base
INTERCOM.
on the handset to an-
INTCM
INTERCOM
(on the base) or
• To transfer the call, press
or again when the per-
COM INTCM
son at the handset or base answers.
• To start a three-way call, tell the per-
son at the base or handset to press
(or ), then press the
LINE 1 LINE 2
same button twice on your keypad
when they answer the page.
• You cannot page the base or hand-
set if it is already in use. You will
hear a warning tone.
on
INTCM
on the
INTER-
(on the
INTCM
INTER-
19