Making A Call From A Caller Id Record - Radio Shack 43-143 Owner's Manual

Beyond the Basics
3. To scroll quickly through the list, press and hold
4. To exit the Caller ID list while the phone is in standby:
HANDSET:
BASE:
If you are looking up an entry during a call:
HANDSET:
BASE:
During a call, pressing
exit the Caller ID list will disconnect the call immediately.
NOTE
Making a Call from a Caller ID Record
1. When the phone is in standby, press
2. Use
record you want to dial.
3. To add (or delete) a "1" at the beginning of the displayed
phone number, press /TONE. To add (or remove) the stored
area code, press #.
4. To dial the number:
HANDSET:
BASE:
The phone will automatically select a free line.
OR
To dial the number selecting a particular line:
HANDSET:
BASE:
UP841BH_43-143_OM3.indd 51
Press .
Press /EXIT.
Press /FLASH.
Press /EXIT.
on the handset or
The number of calls from the same Caller ID will
appear next to the time to indicate that this is an
unread message. If you received 10 or more calls
from the same Caller ID, * appears. Once you
review the new message, the number or * will
disappear.
, , or a number key (0, 2 – 9) to find the Caller ID
Press /FLASH or
Press or pick up the base corded handset.
Press the LINE1 or LINE2 soft key.
Press LINE1 or LINE2.
1
or
on the base to
.
SPEAKER.
.
12/19/2006 6:55:22 PM