Setting A Security Code Or Personal Identification Number (Pin); Using The Answering Machine; Turning Your Answering Machine On And Off - Radio Shack 43-143 Owner's Manual

Beyond the Basics
Setting a Security Code or Personal
Identification Number (PIN)
To play your messages from a remote location, you will need to
enter a two-digit security code or Personal Identification Number
(PIN). The default security code is 80.
1. Press the MENU soft key.
2. Select the ANSW. SETUP menu, and then the SECURITY
CODE submenu.
3. Move the cursor to select
soft key.
4. Enter a two-digit security code (01-99) using the number
keypad (0 - 9).
5. Press the OK soft key. You will hear a confirmation tone.
Using the Answering Machine
Turning Your Answering Machine On and Off
From the Base
Turning On
1. With the phone in standby, press
2. Press the LINE1 or LINE2 soft key.
3. The answering machine announces "Answering System is
on" and plays the current greeting message.
4. The message counter displays the number of messages
stored in memory. If the counter flashes, then you have new
messages waiting.
UP841BH_43-143_OM3.indd 76
or , and then press the OK
.

12/19/2006 6:55:28 PM