T-Coil (Cordless Handset Only) - Radio Shack 43-143 Owner's Manual

The Basics
Adjusting the Speaker Volume
You can choose from six volume levels for the cordless handset
speakerphone and ten volume levels for the base speakerphone.
To adjust the volume while on a call, press
(softer).
T-coil (Cordless Handset Only)
Digital spread spectrum cordless phones generate magnetic
signals that could cause noise to be heard by users wearing
hearing aids set to "T" mode. (The "T" mode is only found on
hearing aids equipped with a telecoil ("T" coil) feature). This
phone includes a special "T-coil" mode that, when activated,
reduces the magnetic noise generated by the cordless handset.
To activate the "T-coil" mode perform the following steps on your
cordless handset:
1. When the phone is in standby, press the MENU soft key.
2. Select the HANDSET SETUP menu, and then the T-COIL
submenu.
3. Move the cursor to select ON or OFF.
4. Press the OK soft key. You will hear a confirmation tone.
NOTE
UP841BH_43-143_OM3.indd 31
Using the T-coil feature may shorten your battery's
talk time. Please set to off the T-coil feature when
not using this feature.
1
(louder) or
12/19/2006 6:55:17 PM