Activating The Message Alert; Activating Call Screening - Radio Shack 43-143 Owner's Manual

Beyond the Basics
While your answering machine is set to Announce Only, the base
will display ANNOUNCE ONLY. If you are using the prerecorded
greeting, the answering machine automatically switches to the
following message:
"Hello, no one is available to take your call. Please call again."
If you are using a personal greeting, the answering machine
continues to use that greeting.
Activating the Message Alert
The message alert feature sounds a short alert tone every 15
seconds whenever you have a new message.
1. Press the MENU soft key.
2. Select the ANSW. SETUP menu, and then the MESSAGE
ALERT submenu.
3. Move the cursor to select
soft key.
4. Move the cursor to select ON or OFF.
5. Press the OK soft key. You will hear a confirmation tone.
Activating Call Screening
Your phone allows you to listen to callers leaving you a message.
This, call screen, feature can be turned on or off.
1. Press the MENU soft key.
2. Select the ANSW. SETUP menu, and then the CALL SCREEN
submenu.
3. Move the cursor to select
soft key.
4. Move the cursor to select ON or OFF.
5. Press the OK soft key. You will hear a confirmation tone.
UP841BH_43-143_OM3.indd 75
or , and then press the OK
or , and then press the OK

12/19/2006 6:55:28 PM