Customizing Your Phone; Changing The Handset Banner (Cordless Handset Only) - Radio Shack 43-143 Owner's Manual

Beyond the Basics
NOTES
Customizing Your Phone
Changing the Handset Banner (Cordless
Handset Only)
Each handset will display a banner name once it is registered
to the base. The default banner is Handset #1, Handset #2, etc.
You can change the name your phone displays by changing the
banner display. If you have more than one handset, you can use
the banner name to identify your handset during handset-to-
handset functions like intercom and DirectLink. The banner lets
you customize the name your handset displays. The name will be
displayed on the LCD screen during standby, intercom, transferring
a call, room monitor, and copy phonebook operations. The banner
name will be displayed on the receiving station as well.
1. Press the MENU soft key.
2. Select the HANDSET SETUP menu, and then the BANNER
DISPLAY submenu.
3. Use the keypad or the DELETE soft key to enter or edit the
banner name. (See "Entering Text from Your Phone" on page
26 for detailed instructions on entering text.)
4. Press the OK soft key. You will hear a confirmation tone.
UP841BH_43-143_OM3.indd 40
• If your phonebook contains 100 entries, you
cannot store any new phonebook entries. You
will hear a beep, and NOT ENOUGH MEMORY IN
RECEIVING UNIT appears on the display.
• If the selected handset is out of range or data
transfer is canceled, UNAVAILABLE appears
in the display. Phonebook listings will not be
transferred.
0
12/19/2006 6:55:19 PM