Unix - Installing Drivers; Setting Up The Printer - Xerox WorkCentre 3315DN System Administrator Manual

Hide thumbs Also See for WorkCentre 3315DN:
Table of Contents

Advertisement

Unix - Installing Drivers

Unix printer drivers are located on the Software and Documentation CD delivered with your machine.
To use the Unix printer driver, you need to install the Unix printer driver package first, then set up the
printer. The installation procedure is common for all variants of Unix OS mentioned.
Procedure for Installing the Unix Driver Package
1.
Make sure that the machine is connected to your computer and powered on.
2.
Acquire root privileges.
su -
3.
Copy the appropriate driver archive to the target Unix computer.
4.
Unpack the Unix printer driver package name.
For example, on IBM AIX, use the following command:
gzip -d < "package archive name" | tar xf -
The "binaries" folder consists of binz, install, share files and folders.
5.
Change to the driver's "binaries" directory.
For example, on IBM AIX,
cd aix_power/binaries
6.
Run the install script.
./install
Install is the installer script file which is used to install or uninstall the Unix Printer Driver package.
Use "chmod 755 install" command to give the permission to the installer script.
7.
Execute the "./install-c" command to verify installation results.
8.
Run "installprinter" from the command line. This will bring up the Add Printer Wizard window.
Follow the procedures in
Note
On some Unix OS, for example on Solaris 10, printers recently installed may not be enabled
and/or may not accept jobs. In this case run the following two commands on the root terminal:
accept <printer_name>
enable <printer_name>

Setting up the printer

To add the printer to your Unix system, run "installprinter" from the command line. This will bring up
the Add Printer Wizard window. Setup the printer in this window according to the following steps.
1.
Type the name of the printer.
2.
Select the appropriate printer model from the model list.
3.
Enter any description corresponding to the type of printer in the Type field. This is optional.
4.
Specify any printer description in the Description field. This is optional.
5.
Specify the printer location in the Location field.
Setting up the printer
on page 53 to setup the printer.
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide

Unix - Installing Drivers

53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 3325dnWorkcentre 3325dni

Table of Contents