Table of Contents
Advertisement
Properties
UPnP
The UPnP page allows you to configure the SSDP protocol (Simple Service Discovery Protocol) on the
device.
1.
In the Network Settings link select the UPnP link.
2.
Select Enable to enable the SSDP Protocol.
Enter the required information for SSDP TTL.
3.
4.
Select Apply to save the settings.
mDNS
The mDNS page allows you to enable the MDNS protocol (Multicast DNS) on the device. This protocol
is used in Bonjour (formerly Rendezvous) from Apple.
1.
In the Network Settings link select the mDNS link.
2.
Select Enable to enable the mDNS Protocol.
3.
Select Apply to save the settings.
CIFS
The CIFS page allows you to configure the CIFS Shared Folder settings on the device.
1.
In the Network Settings link select the CIFS link.
2.
Select Enable to enable the CIFS Server.
3.
Enter the required information to configure the following settings:
•
Max Connection
•
Anonymous
•
Login ID
•
Password
4.
Select Apply to save the settings.
SNMP
The SNMP page allows you to configure the SNMP (Simple Network Management Protocol) v1, v2 and
v3 settings on the device. For instructions, refer to
Outgoing Mail Server (SMTP)
The Outgoing Mail Server (SMTP) page allows you to configure the SMTP (Simple Mail Transfer
Protocol) settings on the device. For instructions, refer to
158
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
SNMP
on page 125.
Configure SMTP
on page 105.
Advertisement
Table of Contents
