Memory Module - HP ENVY 15 Maintenance And Service Manual

Reverse this procedure to install the hard drive.

Memory module

Description
8 GB (PC3L, 12800, 1600 MHz)
4 GB (PC3L, 12800, 1600 MHz)
2 GB (PC3L, 12800, 1600 MHz)
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
result in various system problems.
To update BIOS:
1. Go to http://www.hp.com/support.
2. Select Drivers & Dowloads, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
Failure to update the computer to the latest BIOS prior to installing new memory may
Spare part number
693374-001
691740-001
691739-001
Component replacement procedures 47