Front Speakers - HP ENVY 15 Maintenance And Service Manual

5. Remove the fingerprint reader board (5) and cable.
Reverse this procedure to install the fingerprint reader board.

Front speakers

Description
Front speakers (include left and right front speakers, 2 cables, and 4 isolators)
Before removing the front speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. mSATA SSD (see
c. Hard drive (see
d. Base enclosure (see
e. System board (see
Battery on page 40), and then remove the following components:
Service door on page
mSATA SSD on page
Hard drive on page 45)
Base enclosure on page
System board on page
41)
42)
52)
63)
Component replacement procedures
Spare part number
720562-001
85