Msata Ssd - HP ENVY 15 Maintenance And Service Manual

mSATA SSD

NOTE: This section applies only to computer models equipped with an Intel processor.
Description
24 GB
Before removing the mSATA SSD, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service door (see
Remove the mSATA SSD:
1. Identify the mSATA SSD (1).
2. Remove the Phillips PM2.0×2.5 screw (1) that secures the mSATA SSD to the system board.
(The drive tilts up.)
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 40).
Service door on page
Spare part number
720564-001
41).