Table of Contents
Advertisement
Memory module
Description
Memory module (PC4-2400)
8-GB
4-GB
2-GB
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
To remove a memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2.
Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Battery on page
28).
Optical drive on page
Bottom cover on page
29), if installed.
35).
Component replacement procedures
Spare part number
862398-855
862397-855
864271-855
39
Advertisement
Table of Contents
