Monitoring The Chassis; Checking The Overall Chassis Status; Checking The Temperature Status - Alcatel-Lucent OmniSwitch 6250-24M User Manual

Booting 6250 Switches

Monitoring the Chassis

OmniSwitch 6250 switches can be monitored and managed via the console port using Command Line
Interface (CLI) commands. The switches can also be monitored and managed via the Ethernet using CLI
commands, WebView, SNMP, and OmniVista.
The section below provides some examples of useful hardware-related monitoring CLI commands. Refer
to the OmniSwitch CLI Reference Guide for detailed information on all management and monitoring
commands used with the OmniSwitch 6250 switch.

Checking the Overall Chassis Status

To check the overall status of a chassis, including the chassis type, and current administrative and opera-
tional status, use the
-> show chassis
Chassis 1
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Admin Status:
Operational Status:
Number Of Resets:
MAC Address:
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.

Checking the Temperature Status

To check chassis temperature status, including the current temperature and configured threshold values,
use the show temperature
-> show temperature
Temperature for sensor 1
Hardware Board Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Status
Temperature Danger Threshold (deg C)
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
OmniSwitch 6250 Hardware Users Guide
show chassis command. For example:
OS6250-14,
12 RJ45 + 2 SFP,
902632-90,
B07,
H47Q0027,
JAN 03 2008,
POWER ON,
UP,
23
00:e0:b1:6b:ef:30,
command. For example:
June 2012
Monitoring the Chassis
= 39,
= 14 to 86,
= 80,
= UNDER THRESHOLD,
= 86
page 4-5