Power Supply Information - Alcatel-Lucent OmniSwitch 6250-24M User Manual

Mounting OS6250 Switches

Power Supply Information

Before getting started, please note that OmniSwitch 6250 power supplies can be installed in a number of
different configurations. For example:
•
Non-redundant system power - Provides power requirements to the chassis, with no power supply
redundancy/failover.
•
Redundant system power - Provides power requirements to the chassis as well as power supply redun-
dancy/failover.
•
Non-redundant system and Power over Ethernet (PoE) - This provides power requirements to the
chassis, as well as power requirements to the PoE ports.
•
Redundant system and Power over Ethernet (PoE) - This provides power requirements to the chassis
and PoE ports as well as power supply redundancy/failover to both chassis and PoE.
Refer to the table below for typical power supply and power supply tray requirements for different
configurations.
Power requirements
Non-redundant with internal power
Redundant with internal power
Non-redundant without internal
power
Redundant without internal power
OmniSwitch 6250 Hardware Users Guide
External Power supplies
needed
0
1
1
2
June 2012
Power Supply Information
Power supply trays needed
0
1
1
2
page 3-5