Table of Contents
Advertisement
Booting 6855 Series Switches
Monitoring the Chassis
OmniSwitch 6855 Series switches can be monitored and managed via the console port using Command
Line Interface (CLI) commands. The switches can also be monitored and managed via the Ethernet using
CLI commands, WebView, SNMP, and OmniVista.
The section below provides some examples of useful hardware-related monitoring CLI commands. Refer
to the OmniSwitch CLI Reference Guide for detailed information on all management and monitoring
commands used with the OmniSwitch 6855 Series switch.
Checking the Overall Chassis Status
To check the overall status of a chassis, including the chassis type, and current administrative and opera-
tional status, use the
-> show chassis
Chassis 1
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Admin Status:
Operational Status:
Number Of Resets:
MAC Address:
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
Checking the Temperature Status
To check chassis temperature status, including the current temperature and configured threshold values,
use the
show temperature
-> show temperature
Temperature for sensor 1
Hardware Board Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Status
Temperature Danger Threshold (deg C)
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
OmniSwitch 6855 Series Hardware Users Guide
show chassis
command. For example:
OS6855-14,
12 RJ45 + 2 SFP,
902632-90,
B07,
H47Q0027,
JAN 03 2008,
POWER ON,
UP,
23
00:e0:b1:6b:ef:30,
command. For example:
March 2009
Monitoring the Chassis
= 39,
= 14 to 86,
= 80,
= UNDER THRESHOLD,
= 86
page 5-5
Hide quick links:
Advertisement
Table of Contents
