Monitoring Chassis Components; Viewing Chassis Slot Information; Monitoring Chassis Temperature - Alcatel-Lucent OmniSwitch 6900 Hardware User's Manual

Chassis and Power Supplies

Monitoring Chassis Components

Viewing Chassis Slot Information

To view basic slot information, enter the show module command at the CLI prompt:
-> show module
To view more detailed information, use the show module long command:
-> show module long

Monitoring Chassis Temperature

The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range. Refer to the chassis specifications section for additional information.
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations
on page 3-33.
To check the switch's current temperature status, use the show temperature command:
-> show temperature
For more information about this command, see the "Chassis Management and Monitoring Commands"
chapter in the OmniSwitch AOS Release 8 CLI Reference Guide
OmniSwitch 6900 Hardware Users Guide June 2020
Monitoring Chassis Components
page 3-61