Os6250-Rear-Mnt - Mounting Instructions; Steps - Alcatel-Lucent OmniSwitch 6250-24M User Manual

Mounting OS6250 Switches

OS6250-REAR-MNT - Mounting Instructions

Alcatel-Lucent provides an optional rack mounting kit that allows OmniSwitches to be secured to both the
front and back rails of the rack for additional stability.
Parts Provided
Tray Inserts (2)

Steps

1
(3) M2.6
(2) M3
1. Attach the tray inserts to the power supply trays
using the attachment screws, as shown.
3
3. Attach the slide bracket to the rear of one power tray
and the slot bracket to the rear of the other power sup-
ply tray and slide chassis together.
OmniSwitch 6250 Hardware Users Guide
Extension Brackets
(2) M3
June 2012
Slot/Slide Brackets
Flanged Inserts
2
(3) M3
Detail
2. Attach an extension bracket to both sides of the
chassis assembly. The guide rails should face out and
the word "TOP" should face up. Be sure to use three
screws at front and four at the rear of rails.
4
4. Slide the bracket inserts into the extension bracket
guide rails until the flanges meet the rack. Be sure that
the rack mount flanges are facing out and secure.
Mounting OS6250 Switches
(30) M3
(6) M2.6
Attachment Screws
(4) M3
page 3-19