Resetting A Default Volume; Selecting A Ring Tone - Nortel 1140E User Manual

Resetting a default volume

Follow this procedure to reset the default volume of the handset, the
headset, or the handsfree speaker.
Step
1
2
3
4
5
6

Selecting a ring tone

Follow this procedure to select a ring tone.
You can listen to a ring tone before you select it, through the Play and Stop
options.
Prerequisites
The system administrator must grant you permission to change your ring
tone
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
Action
From the main menu, select and open Audio.
The Audio menu opens.
Navigate through the menu and select Default Volumes.
Select the transducer you want to reset to the default.
Press Ok, or press the send key.
The Default Volumes menu opens.
Scroll through the menu and select Default.
Press Apply to confirm the action.
The default volume is applied the next time the transducer is used.
Action
From the main menu, select and open Audio.
The Audio menu opens.
Navigate through the menu and select Play Ring Patterns.
The list of ring tones opens.
To hear a ring tone before you select it, select one from the list and
press Play .
Press Stop to stop the ring tone from playing.
To select a ring tone, press Apply.
Carrier VoIP
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
Selecting a ring tone 45
—End—
Nortel Networks Confidential