Assigning A Directory Entry To A Feature Key; Enabling Or Disabling Autoscroll - Nortel 1140E User Manual

7

Assigning a directory entry to a feature key

Follow this procedure to assign a directory entry to a feature key. Assigning
a directory entry to a feature key gives you the ability to speed dial that
number when you press the key.
Prerequisites
The feature key you select must be defined as Local, see
key type" (page 50)
Step
1
2
3
4
5

Enabling or disabling autoscroll

If autoscroll is enabled, the IP Phone automatically directs you to the screen
for the active feature. For example, if your secondary Directory Number
(DN) is configured on screen two, and you receive a call to that number, the
feature screens scroll to page two. You can answer the call immediately
without searching for the screen.
Follow this procedure to enable or disable the autoscroll feature.
Copyright © 2006, Nortel Networks
.
The key type is changed and a check mark appears beside the
selection.
To assign a directory entry to a Local key, see
entry to a feature key" (page
Action
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Select the key defined as Local.
The Assign menu appears.
Press Feature.
The directory contact list opens.
Scroll through the list and select the entry to assign to the feature key.
Press Ok, or press the send key.
A check mark appears beside that entry in the directory. The number
is dialed when you press the key.
Carrier VoIP
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
Using the Assign menu 51
"Assigning a directory
51).
—End—
—End—
"Defining the
Nortel Networks Confidential