Terminal Indicators - Nortel 1140E User Manual

12 About the IP Phone 1140E
IP Phone 1140E display

Terminal indicators

The IP Phone terminal uses light-emitting diodes (LEDs) of different colors
to indicate the current state of the terminal. This table describes each color
and its associated state.
A steady indicator means that the extension or feature beside it is active. A
flashing indicator means the line is on hold or the feature is in the process of
being programmed.
Indicator
Message waiting
Data waiting
Headset
Handsfree
Copyright © 2006, Nortel Networks
.
LED color
Red (located on the top right
corner of the set)
Blue (located on the top left
corner of the set)
Red (located on the front, on
the headset key)
Red (located on the front, on
the handsfree key)
Carrier VoIP
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
Meaning
Lit when a message is waiting,
or a call is missed. The light
turns off after you retrieve your
message.
Lit when the terminal is on an
active call.
Lit when the headset is in use.
Lit when the handsfree mode
is active.
Nortel Networks Confidential