Table of Contents
Advertisement
ENGLISH
Convenient Functions
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
ENTER
uio p
QUICK SELECT
ENTER
uio p
[CHANNEL
LEVEL]
Front
Setting the Power to Standby After a
Certain Amount of Time
(Sleep Timer Function)
BUTTON
<BUTTON>
With this function, you can set the AVR-3310 so that the power is
[BUTTON]
automatically switched to standby after the set amount of time has
passed.
This is convenient for playing sources while going to sleep.
When the sleep timer turns the power off in the MAIN ZONE, the
power also turns off in the ZONE2 and ZONE3.
[SLEEP]
Press
and display the time you want to set.
The "
" indicator on the display lights.
•
The time switches as shown below each time
OFF
QUICK SELECT
n
To cancel the sleep timer
[SLEEP]
Press
to set "OFF".
The "
" indicator on the display turns off.
The sleep timer setting is canceled if the AVR-3310's power is set to
standby or turned off.
[SLEEP]
[PARTY]
Rear
[SLEEP]
is pressed.
120 min
90 min
30 min
60 min
Adjust the Volume of the Speakers
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Adjust the Volume of the Different Speakers
1
Press
[CHANNEL LEVEL]
.
2
Use
to select the speaker.
ui
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use
to adjust the volume.
o p
In the case of a subwoofer, press
o
when it is at "–12 dB" will
b
change the setting to "OFF".
When a headphone jack is inserted, the headphone channel level can
be adjusted.
Adjusting the Volume of Groups of Speakers
(Fader Function)
This function lets you adjust (fade) the sound from all the front (Front
speaker / Front height speaker / Center speaker) or rear (Surround
speaker / Surround back speaker) speakers at once.
1
Use
i
to select "Fader", then select the item to be
o
p
adjusting using
or
.
2
Use
o p
to adjust the volume of the speakers.
(
o
: front,
p
: rear)
•
The fader function does not affect the subwoofer.
•
The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
Hide quick links:
Advertisement
Table of Contents
