Denon AVR-3310 Owner's Manual page 37

Av surround receiver
Hide thumbs Also See for AVR-3310:
Table of Contents

Advertisement

Making the Speaker Settings (Speaker Setup)
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
Setting items
Amp Assign
Normal : The surround back channel audio signals are output.
ZONE2 : The ZONE2 audio signals are output.
Sets the signal output to the
speaker connected to the
ZONE3 : The ZONE3 audio signals are output.
ZONE2/3-MONO : The ZONE2 / ZONE3 monaural audio signals are
SURR. BACK/AMP ASSIGN
output.
terminals.
Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
playback of the front A speakers.
Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp
playback of the front B speakers.
Front Height : The front height channel audio signals are output.
Speaker Configuration
Front : Set the front speaker size.
Large : Use of a large speaker that can adequately playback low
Select speaker configuration
frequencies.
and size (bass reproduction
Small : Use of a small speaker that has inadequate playback capacity for
capability).
low frequencies.
NOTE
Select "Large" or "Small"
When "Subwoofer" is set to "No", "Front" can automatically set to
not
according
to
the
"Large".
physical size of the speaker
When "Front" is set to "Small", "Center", "Surround", "Surround
but according to the low
Back" and "Front Height" can not be set to "Large".
frequency
reproduction
Center : Set the presence and size of the center speaker.
capabilities based on the
Large : Use of a large speaker that can adequately playback low
frequency set at "Crossover
frequencies.
Frequency" (vpage 35).
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
Yes : Use a subwoofer.
No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" can automatically set
to "Yes".
Main remote control
operation buttons
Default settings are underlined.
Setting contents
:Displaying the menu
:Moves the cursor
Cancel the menu
(Up/Down/Left/Right)
Setting items
Speaker Configuration
Surround : Set the presence and size of the surround speakers.
Large : Use of a large speaker that can adequately playback low
(Continued)
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround speakers A are not connected.
When "Surround" is set to "Large", "Front Height" can be set to
"Large".
When "Surround" is set to "None", "Surround Back" and "Front Height"
can automatically set to "None".
Surround Back : Set the presence, size and number of surround back
speakers.
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround back speakers are not connected.
2spkrs : Use two surround back speakers.
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
When the "Amp Assign" setting (vpage 33) is other than "Normal",
you cannot make the "Surround Back" setting.
Even when the Surround Back Speaker setting is other than "None",
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, "Surround Parameters" – "Surround
Back" setting other than "OFF" (vpage 68).
Front Height : Set the presence and size of the front height speakers.
Large : Use of a large speaker that can adequately playback low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the front height speakers are not connected.
When the "Amp Assign" setting (vpage 33) is other than "Front
Height", you cannot make the "Front Height" setting.
:Confirm the setting
ENGLISH
Making Detailed Settings (Manual Setup)
Setting contents
See overleaf

:Return to previous menu

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents