Denon AVR-3310 Owner's Manual page 49

Setting items
HDMI
The DVD HDP
Set this to change the HDMI
are assigned to the HDMI input terminals as shown below.
input terminals assigned to
the input sources. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5
None : Do not assign an HDMI input terminal to the selected input
source.
Upon purchase, the settings of the different input sources are as shown
b
below.
Input
source
Default
setting
• An input source to which an HDMI input terminal cannot be assigned is
displayed as "– – –".
• To play the video signal assigned at "HDMI" combined with the audio
signal assigned at "Input Assign" – "Digital", select "Digital" at "Input
Mode" (vpage 47).
• When the AVR-3310 and monitor are connected with an HDMI cable, if
the monitor is not compatible with HDMI audio signal playback, only the
video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
• When control dock for iPod is used as the input source, assignment of
the HDMI input terminal is disabled, even if it is assigned.
• When "HDMI Control" (vpage 35) is set to "ON", HDMI input terminal
cannot be assigned to "TV".
Digital
CD DVD
The
Set this to change the digital
sources are assigned to the digital input terminals as shown below.
input terminals assigned to
the input sources. Coax 1 (Coaxial) / Coax 2 / Coax 3 / Opt 1 (Optical) / Opt 2 / Opt 3
None : Do not assign a digital input terminal to the selected input source.
Main remote control
operation buttons
Setting contents
TV SAT/CBL VCR DVR V.AUX input sources
SAT/
DVD HDP TV VCR DVR
CBL
HDMI HDMI HDMI HDMI
None None
1 2 3 4
HDP TV SAT/CBL VCR DVR
:Displaying the menu
Cancel the menu
Setting items
Digital
(Continued)
V.AUX
HDMI
5
Component
Set this to change the
component video input
terminals assigned to the
input sources.
V.AUX input
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making the Input Settings (Input Setup)
Setting contents
Upon purchase, the settings of the different input sources are as shown
b
below.
Input
CD DVD HDP
source
Default
None
Coax 3 Coax 1
setting
Input
DVR V.AUX
source
Default
Opt 2 Opt 3
setting
When control dock for iPod is used as the input source, assignment of
the digital input terminal is disabled, even if it is assigned.
The DVD
HDP TV SAT/CBL VCR
are assigned to the component video input terminals as shown below.
1-RCA (Component video 1) / 2-RCA (Component video 2) / 3-RCA
(Component video 3)
None : Do not assign a component video input terminal to the selected
input source.
Upon purchase, the settings of the different input sources are as shown
b
below.
Input SAT/
DVD HDP TV
source CBL
Default
1-RCA 2-RCA None None
setting
• An input source to which a component video input terminal cannot be
assigned is displayed as "– – –".
• When control dock for iPod is used as the input source, assignment of
the component video input terminal is disabled, even if it is assigned.
:Return to previous menu
ENGLISH
TV SAT/CBL VCR
None
Opt 1 Coax 2
V.AUX input sources
DVR
VCR DVR V.AUX
None 3-RCA None
See overleaf