Making The Input Settings (Input Setup) - Denon AVR-3310 Owner's Manual

Setting items
Add New Feature Upgrade : Execute the upgrade process.
When updating starts, the power indicator becomes red and the GUI
Display the new functions
screen is shut down. The amount of update time which has elapsed is
(payment required) which
displayed.
can be purchased for
When updating is complete the power indicator becomes green and
downloading to the AVR-
normal status is resumed.
3310 and upgrade.
When you purchase a
b If the upgrade is not successful, an error message identical to those in
new function and register
"Firmware Update" will appear on the display, check the settings and
your user information,
network environment, then update again.
"Registered" is displayed
Upgrade Status : A list of the additional functions provided by the Upgrade
on this menu and you can
will be displayed.
proceed with the upgrade.
When "Not Registered" is displayed on the Add New Feature screen,
you cannot upgrade.
To use the upgrade function, you should purchase an upgrade package
from the DENON website.
To purchase the package, you will need the ID number shown on this
screen.
To display the ID number on the screen, hold
down for 3 seconds or more.
Notes concerning use of "Firmware Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection.
• Do not turn off the power until updating or upgrating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
Once updating/upgrading starts, normal operations on the AVR-3310 cannot be performed until
updating/upgrading is completed.
Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc., set
for the AVR-3310.
• The following backup data may be erased after an update or upgrade.
Internet radio preset channel
•
Internet radio Recently Played data
•
Care of data in Internet radio, media server and USB memory device
•
• In the event of an update error during update or upgrade, turn the AVR-3310's power off and then on
again. "Update Retry" appears on the display and update restarts from the point at which update failed.
If the error continues despite this, check the network environment.
• Information regarding the "Firmware Update" function and "Add New Feature" will be announced on
the DENON web site each time related plans are defined.
• When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification
message is displayed on the GUI screen. When you do not want to be notified, set "Update Notification"
(vpage 39) and "Upgrade Notification" (vpage 39) to "OFF".
Main remote control
operation buttons
Making Detailed Settings (Manual Setup)
Setting contents
<p> <STATUS>
and
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Making the Input Settings
(Input Setup)
For details on how to select, set and cancel settings for each menu, see "GUI Menu
Operation" (vpage 25).
Make the settings related to the currently selected input source.
[SOURCE SELECT]
Before displaying the menu screen, press
The items that can be set differ according to the selected input source.
The set can be used without changing these settings. Make these settings as necessary.
For a description of "GUI Menu Map" and operating instructions, see page 24.
n Items that can be set with the Input Setup procedure
Changing the Input Terminal Assignments (Input Assign) vpage 44
Making the Video Settings (Video) vpage 46
Changing the Input Mode and Decoding Mode (Input Mode) vpage 47
Changing the Input Source's Display Name (Rename) vpage 48
Correcting the Input Source's Playback Level (Source Level) vpage 48
Setting the Playback Mode (Playback Mode) vpage 48
n iPod (vpage 48)
NET/USB, Media Server, USB and Napster (vpage 49)
n
Making the Settings to Play Still Pictures (Still Picture) vpage 49
Automatically Presetting Radio Stations (Auto Preset) vpage 49
Setting Preset Channels so that They are not Displayed When Tuning
(Preset Skip) vpage 49
Giving Names to Preset Stations (Preset Name) vpage 49
:Confirm the setting
ENGLISH
to switch to the input source to be set.

:Return to previous menu