Table of Contents
Advertisement
Setting items
Other
Party Start Level : Make settings for volume level when the Party Mode
is started.
(Continued)
•
Last : The same volume as set before the party mode was started.
•
– – – (0) : Always use the muting on condition when the Party Mode is
started.
•
–80dB ~ 18dB (1 ~ 99) : Start party mode with your preferred volume.
•
This can be set when "Party Mode Function" is set to "ON".
•
This is displayed from 0 to 99 when "Volume Display" (vpage 40) is
set to "Absolute".
•
You can set to the upper limit set with "Volume Limit" (vpage 40) .
Network Status : Displays up to a maximum of 10 DENON products
connected on the same network.
•
Friendly Name / Model Name / Power ON/Standby / Select Source /
Volume Level / Party Mode status
"Network Status" is only displayed for DENON products supporting
the Network Status function.
Update Notification : Displays a notification message on the AVR-3310's
GUI screen when the latest firmware is released with "Firmware Update".
The notification message is displayed for about 20 seconds when the
power is turned on. Connect to broadband Internet (vpage 22) when
using this function.
•
ON : Display update message.
•
OFF : Do not display upgrade message.
•
When you press
"Check for Update" screen is displayed. (Refer to page 42 for more
information on "Firmware Update")
RETURN
•
Press
Upgrade Notification : Display a notification message on the AVR-3310's
GUI screen when downloadable firmware is released with "Add New
Feature". The notification message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage
22) when using this function.
•
ON : Display update message.
•
OFF : Do not display upgrade message.
•
When you press
"Add New Feature" screen is displayed. (Refer to page 43 for more
information on "Add New Feature")
RETURN
•
Press
Main remote control
operation buttons
Setting contents
ENTER
during display of the notification message, the
to erase the notification message.
ENTER
during display of the notification message, the
to erase the notification message.
:Displaying the menu
Cancel the menu
Setting items
Napster Account
Set or change Username
and Password (vpage 60
"Listening to Napster").
Network Information
Display network information.
Making the Multi-zone Settings (Zone Setup)
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Setting items
Bass
Adjust low frequency range
(bass).
Treble
Adjust high frequency range
(treble).
HPF
Make settings for cutting
the low range to reduce
distortion in the bass.
Level Lch
Adjust
the
left
channel
output level.
Level Rch
Adjust the right channel
output level.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making Detailed Settings (Manual Setup)
Setting contents
Username / Password
The types of characters that can be input are as shown below.
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
(Space)
GNumbersH 0123456789
•
You can change the character type when you press
character input.
•
The password may not contain underscores ( _ ).
Friendly Name / DHCP= ON/OFF / IP Address / MAC Address
Default settings are underlined.
Setting contents
–10dB ~ +10dB (0dB)
–10dB ~ +10dB (0dB)
OFF : The low range is not attenuated.
ON : The low range is attenuated.
–12dB ~ +12dB (0dB)
The "Level Lch" can be set when "Channel" (vpage 40) is set to
"Stereo".
–12dB ~ +12dB (0dB)
The "Level Rch" can be set when "Channel" (vpage 40) is set to
"Stereo".
:Return to previous menu
ENGLISH
[SEARCH]
during
See overleaf
Hide quick links:
Advertisement
Table of Contents
