Converting Input Video Signals For Output; (Video Conversion Function) - Denon AVR-3310 Owner's Manual

ENGLISH
Important Information

Converting Input Video Signals for Output

(Video Conversion Function)

The AVR-3310 has 4 different types of video input/output terminal (HDMI, Component video, S-Video,
Video).
Use the terminals according to the devices to be connected.
This function automatically converts various formats of video signals input to the AVR-3310 into the format
used to output the video signals from the AVR-3310 to a monitor (vpage 96 "Relationship Between
Video Signals and Monitor Output").
GFlow of video signals for MAIN ZONEH
Video device
Input
Output (IN)
HDMI connector HDMI connector
Component video Component video
connectors connectors
S-Video connector S-Video connector
Video connector Video connector
0
AVR-3310
Monitor
Output
Input
(MONITOR OUT)
HDMI connector HDMI connector
Component video Component video
connectors connectors
S-Video connector S-Video connector
Video connector Video connector
: When 480i/576i signals are input
GFlow of video signals for ZONE2H
Video device
Input
Output
(IN)
S-Video connector S-Video connector
Video connector Video connector
Set as Necessary
• Set when using the video conversion function.
"Video Convert" (vpage 46)
• Set when changing the resolution of the video signal.
"Resolution" (vpage 47)
Resolutions of HDMI-compatible TVs can be checked at "HDMI Information" – "Monitor Information"
(vpage 73).
NOTE
• HDMI signals cannot be converted into analog signals.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• 480p/576p/1080i/720p/1080p component video input signals cannot be converted into S-Video or Video
format.
AVR-3310
Monitor
Output
Input
(MONITOR OUT)
Video connector Video connector