Denon AVR-3310 Owner's Manual page 50

ENGLISH
Making the Input Settings (Input Setup)
Setting items
iPod dock
The control dock for iPod can be assigned to the
Assign the control dock for
TV
iPod input.
Assign : Assign the control dock for iPod to the selected input source.
None : Do not assign the control dock for iPod to the selected input
source.
• By default on first use, it is assigned to "VCR (iPod)".
• An input source to which control dock for iPod cannot be assigned is
displayed as "– – –".
• If control dock for iPod is not connected to the AVR-3310, assignment
of the "iPod dock" is disabled, and you can use it as a standard input
source.
Default Yes : Reset to the defaults.
No : Do not reset to the defaults.
Reset all settings to factory
default.
If you select "Default" and press
Setting?" is displayed. Select "Yes" or "No", and then press

Main remote control
operation buttons
Setting contents
SAT/CBL VCR DVR V.AUX input sources.
ENTER
the message "Default
:Displaying the menu
Cancel the menu
Making the Video Settings (Video)
CD DVD HDP
Setting items
Video Select
Change video input to your
preferred input source.
ENTER
.
Video Convert
The input video signal is
converted automatically in
function of the connected
TV (vpage 10 "Converting
Input Video Signals
Output (Video Conversion
Function)").
:Moves the cursor
(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
Source : Play the picture and sound of the input source.
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
source to view. This can be set for individual input sources.
<VIDEO SELECT>
Set by either pressing
SELECT]
on the main remote control.
• When operating from the main remote control unit
[VIDEO SELECT]
Press repeatedly until the picture you want to see is
displayed.
[VIDEO SELECT]
To cancel, press , and select "Source"
• When operating from the main unit
<VIDEO SELECT>
After pressing on the main unit, turn the
SELECT>
on the main unit until the picture you want to see is displayed.
<VIDEO SELECT>
To cancel, press , then turn
select "Source".
NOTE
• It is not possible to select HDMI input signals.
• The video select function does not work with HDMI signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 40) cannot be selected.
This can be set when the input source is DVD
V.AUX .
VCR DVR
ON : The input video signal is converted.
OFF : The input video signal is not converted.
for
• When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set "Video Convert" to "OFF".
• When "Video Convert" is set to "OFF", the video conversion function
does not work. In this case, connect the AVR-3310 and TV with the same
type of cable.
:Confirm the setting :Return to previous menu
[VIDEO
on the main unit or
<SOURCE
<SOURCE SELECT>
and
HDP TV SAT/CBL