Table of Contents
Advertisement
Setting items
EQ Customize
Audyssey Byp. L/R : Set when not using the "Audyssey Byp L/R"
equalizer.
Set so that unused equalizer
•
Used : Use.
settings are not displayed
MULTEQ
•
Not Used : Do not use.
when
is pressed.
Set so that "Audyssey Byp. L/R" settings can be made when
Audyssey™ Auto Setup procedure is performed.
Equalizer settings for which
Audyssey Flat : Set when not using the "Audyssey Flat" equalizer.
"Not Used" is set with the
•
Used : Use.
Quick Select function cannot
•
Not Used : Do not use.
be stored and called out.
Set so that "Audyssey Flat" settings can be made when Audyssey™
Auto Setup procedure is performed.
Manual : Set when not using the "Manual" equalizer.
•
Used : Use.
•
Not Used : Do not use.
Making the Network Settings (Network Setup)
Make network settings.
Setting items
Network Connecting
1. Connect the LAN cable (vpage 22 "Connecting to a Home Network
Make settings for wired
(LAN)").
2. Turn on the AVR-3310 (vpage 23 "Turning the Power On").
LAN.
AVR-3310 performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function, perform the
setting in step 3.
3. Set the IP address at the "Network Connecting".
Main remote control
operation buttons
Setting contents
Default settings are underlined.
Setting contents
w
q
r
:Displaying the menu
:Moves the cursor
Cancel the menu
(Up/Down/Left/Right)
Setting items
Network Connecting
(Continued)
b
•
•
•
•
e
•
:Confirm the setting
Making Detailed Settings (Manual Setup)
Setting contents
q On the GUI menu, select "Network Connecting" – "Detail" and
ENTER
press
.
w Use
o p
to set "DHCP" to "OFF", then press
The DHCP function is disabled.
e Use
uip
to input the address and press
•
IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
•
Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to the AVR-3310, input the subnet mask indicated
in the documentation supplied by your provider. Normally input
255.255.255.0.
•
Default Gateway : When connected to a gateway (router), input
its IP address.
•
Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it
at "Primary DNS". If there are two or more DNS addresses, input
the first one at "Secondary DNS".
ENTER
r Use
i
to select "Exit" and press
Setup is complete.
When connecting to the network via a Proxy server, select "Proxy" and
ENTER
press
(vpage 38 "Proxy settings").
If you are using a broadband router (DHCP function), there is no need
to make the settings at "IP Address" and "Proxy", since the DHCP
function is set to "ON" in the AVR-3310's default settings.
If the AVR-3310 is being used connected to a network without the
DHCP function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
If you cannot connect to the Internet, recheck the connections and
settings (vpage 22).
If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased your
computer.
When you want to cancel the setting during IP address input, press
RETURN
.
:Return to previous menu
ENGLISH
i
.
ENTER
.
.
See overleaf
Hide quick links:
Advertisement
Table of Contents
