Connecting The Recording Components - Denon AVR-3310 Owner's Manual

CD Player
Select the terminal to use and connect the device.
CD player
L R
L R
Set as Necessary
Set this to change the input signal to which the input source is
assigned.
"Input Assign" (vpage 44)
Record Player
Turntable
(MM cartridge)
L R
• The AVR-3310 is compatible with record players with an MM cartridge.
When you connect to a record player with an MC cartridge, use a
commercially available MC head amp or a step-up transformer.
• When you increase the volume without connecting the record player,
there may be "booming" noise from the speakers.
NOTE
The SIGNAL GND terminal of the AVR-3310 is not a safety ground
connection. Connect it to reduce noise when noise is excessive.
Note that depending on the record player, connecting the ground line
may have the reverse effect of increasing noise. In this case, it is not
necessary to connect the ground line.

Connecting the Recording Components

Video Cassette Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting Devices
Equipped with HDMI Terminals" on page 14.
Video cassette recorder
L R
L R
Set as Necessary
Set this to change the input signal to which the input source is
assigned.
"Input Assign" (vpage 44)
NOTE
To record video signals through the AVR-3310, use the same type
of video cable for connection between the AVR-3310 and the player
as the cable used for connection between the AVR-3310 and the
recorder.
ENGLISH
Connecting Devices
L R
L R