Operations During Playback - Denon AVR-1610 Owner's Manual

ENGLISH
TP Search
Use this function to fi nd RDS stations broadcasting traffi c programs
(TP stations).
1
Set to "TUNER/AMP".
2
Press to select "TUNER".
3
Press to select "TP SEARCH".
4
Press .
TP search begins automatically.
b If no TP station is found with the above
operation, all the reception bands are
searched.
b The station name is displayed on the display
after searching stops.
5
To continue searching, repeat steps
2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
38
RT (Radio Text)
"RT" appears on the display when radio text data is received.
1
Set to "TUNER/AMP".
2
Press to select "TUNER".
3
to select "RT" .
Press
b
While receiving an RDS broadcast station,
the text data broadcast from the station is
displayed.
b To turn the display off, press o p.
b If no text data is being broadcast, "NO TEXT
DATA" is displayed.
n To end RDS search / PTY search / TP search / RT
• Do not operate anything for 15 seconds.
• When setting RT, press .

Operations During Playback

Turning Off the Sound Temporarily (Muting)
Press .
• The sound is reduced to the level set at menu "Mute Level"
(vpage 28).
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
• To prevent hearing loss, do not raise the volume level excessively
when using headphones.
• Unplug headphones when performing the Audyssey Auto Setup
procedure or other settings.
Switching the front speakers
Press .
Front A Front B
Front A+B
NOTE
When you set to "Custom" with "Front Speaker Setup" (vpage
27), you cannot operate .
Switching the brightness of the display
Press
.
Bright Dim
OFF Dark
Playing Components