Input Mode - Denon AVR-1610 Owner's Manual

ENGLISH
Changing the Input Source's Input Mode and Decoding mode

(Input Mode)

The selectable input modes depend on the input source and "Assign" setting (vpage
31 "Changing the input sources assigned to the input connectors").
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes for HDMI : Play only signals from HDMI input.
the different input sources. Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
Default
setting
Input
source
Default
setting
• T he "HDMI" settings are made for input sources for which HDMI
input connectors are assigned at "Assign" (vpage 31).
• T he "Digital" settings are made for input sources for which digital
input connectors are assigned at "Assign" (vpage 31).
• When a digital signal is properly input, the "
the display. If the "
input connector assignment and the connections.
• This can also be set by pressing
Each time you press the button, the input mode display will change.
Remote control
32
operation buttons
Default settings are underlined.
Setting contents
DVD HDP TV SAT/CBL
Auto HDMI Digital Auto
DVR V.AUX TUNER
Auto Analog Analog
" indicator lights on
" indicator does not light, check the digital
.
Auto HDMI Digital
Displaying the menu
:
Cancel the menu
Setting items
Decode Mode
Set the input source's
decoding mode.
Changing the Input Source's Display Name (Rename)
Use this procedure to change the display name of the currently selected input source.
VCR
Setting items
Analog
Rename
Change the input source's
display name to the desired
name.
Default
The changed display names
are reset to the defaults.
Analog
: Moves the cursor (Up/Down/Left/Right)
Making the input settings (Input Setup)
Setting contents
Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This can be set for input sources for which "HDMI" or "Digital" is
assigned at "Assign" (vpage 31).
• Normally set this to "Auto" .
Default settings are underlined.
Setting contents
o p
1. Use to set the cursor to the character you want to change.
2. Use ui to change the character, then press
Up to 8 characters can be input.
•
The input character type can be switched by pressing
•
display name is being changed.
• The types of characters that can be input are as shown below.
ABCDEFG HI JKLM NO PQ RSTUVWXYZ
GCapital lettersH
abcdefghijklmnopqrstuvwxyz
GSmall lettersH
' ( ) b + – . / : ; < = > ? [ ]
GSymbolsH
(space)
0123456789
GNumbersH
Yes : Reset to the defaults.
No : Do not reset to the defaults.
: Return to previous menu
: Decision the setting
.
while the