Source Level - Denon AVR-1610 Owner's Manual

Correcting the Input Source's Playback Level

(Source Level)

Use this procedure to correct the playback level of the currently selected input source's audio
input.
Set this if there are differences in the input volume levels between the different sources.
Setting items
–12dB ~ +12dB (0dB)
Source Level
Correct the playback level of
the audio input.
Setting the iPod Playback Mode (iPod Playback Mode)
This can be selected for input sources for which "Assign" is assigned at the "iPod Dock" (vpage
31) setting.
Setting items
Repeat All : Repeat all songs.
Make settings for repeat One : Repeat the current song.
mode. OFF : Cancel repeat mode.
Shuffle n When DENON control dock for iPod ASD-1R or ASD-11R is
Make settings for shuffle
connected
mode.
Songs : Shuffle all songs.
Albums : Shuffle songs from current album only.
OFF : Cancel shuffle mode.
Presetting Radio Stations (Auto Preset)
Setting items
Auto Preset
This can be set when the source is set to TUNER .
Use the auto preset function
Start : Start the auto preset process.
to program radio stations.
If an FM station cannot be preset automatically, select the desired station
by tuning it in manually, then preset it manually.
Remote control
operation buttons
Default settings are underlined.
Setting contents
Default settings are underlined.
Setting contents
Default settings are underlined.
Setting contents
Displaying the menu
: Moves the cursor (Up/Down/Left/Right)
:
Cancel the menu
Setting the Preset Channels to be Skipped (Preset Skip)
Setting items
Preset Skip
This can be set when the source is set to TUNER .
Set the preset memories that
A ~ G : Select the preset channel(s) you do not want to display.
you do not want to display
• ON : Display this number.
when tuning.
• Skip : Skip this number.
If you set "Block Presets" to "Skip" , you can skip the preset memory
blocks (A to G).
Assign Name to a Preset Memory (Preset Name)
Setting items
Preset Name
This can be set when the source is set to TUNER .
Assign name to a preset
1. Use ui to select the preset channel name you want to change,
memory.
then press
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press
• Up to 8 characters can be input.
• The input character type can be switched by pressing
display name is being changed.
• The types of characters that can be input are as shown below.
GCapital lettersH
GSmall lettersH
GSymbolsH
GNumbersH
4. Repeat steps 2 and 3 to change the display name.
: Decision the setting
Making the input settings (Input Setup)
Default settings are underlined.
Setting contents
Default settings are underlined.
Setting contents
.
.
ABCDEFG HI JKLM NO PQ RSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
' ( ) b + – . / : ; < = > ? [ ]
(space)
0123456789
: Return to previous menu
ENGLISH
while the
33