Connecting The Speakers; Installing/Setting The Speakers - Denon AVR-1610 Owner's Manual

s Set the "Pre Assign" Mode According to the Speaker Layout.
The signals output from the AVR-1610's SURR. BACK / FRONT HEIGHT PRE OUT connectors can be
switched to signals of the surround mode being used (vpage 24 "Pre Assign").
The speaker which plays the a
Pre Assign mode sound output from the SURR.
(vpage 24) BACK / FRONT HEIGHT PRE
OUT connectors
Surround back
Normal
speakers
(Default)
Surround back
speakers
b Connect to the SURR. BACK /
Normal
FRONT HEIGHT PRE OUT "L"
connector.
b Set "S.Back (Pre out)" (vpage
25) to "1ch".
Not connected
Normal
b Set the "S.Back (Pre out)" setting
(vpage 25) to "None" .
Front Height
Front Height
speakers

Installing/Setting the Speakers

Connecting the Speakers

Subwoofer with
builtin amplifier
Example of speaker installation
(7.1)
(6.1)
Power amplifier
(5.1)
(7.1)
Front speakers Front speakers
A
(L) (R) (L)
w q w q w
R L
To play surround back speakers or front height speakers,
connect a power amplifier to the AVR-1610's SURR. BACK /
FRONT HEIGHT PRE OUT connectors.
Make the "Pre Assign" (vpage 24) settings.
w q w q
Front Height Surround back
or
speakers
(L) (R)
Center Surround
B speaker speakers
(L)
(R)
q w q w q
w q w
speakers
ENGLISH
(R)
q