Making The Multeq, Dynamic Eq And Dynamic Volume Settings (Audyssey Settings) - Denon AVR-1610 Owner's Manual

Hide thumbs Also See for AVR-1610:
Table of Contents

Advertisement

Making the MultEQ, Dynamic EQ and Dynamic Volume
settings (Audyssey Settings)
• When the "Audyssey Auto Setup" (vpage 20) procedure is performed, the "MultEQ", "Dynamic
EQ" and "Dynamic Volume" functions are enabled.
• Operating conditions for each function
• Dynamic EQ :
When "MultEQ" is set to "ON"
• Dynamic Volume :
When "Dynamic EQ" is set to "ON"
• Setting :
When "Dynamic Volume" is set to "ON"
NOTE
If the speaker settings are changed after the "Audyssey Auto Setup" procedure is performed,
"MultEQ", "Dynamic EQ" and "Dynamic Volume" functions cannot be selected and "Run Audyssey"
is displayed.
If this happens, either perform the "Audyssey Auto Setup" procedure again, or perform the
"Restore" operation (vpage 23) to restore the settings to as they were after the "Audyssey Auto
Setup" procedure was performed.
Setting items
MultEQ
Audyssey : Optimize frequency response of all speakers.
Audyssey Byp.L/R : Optimize frequency response of speakers except
Corrects
the
frequency
front L and R speakers.
response of the different
speakers.
Audyssey Flat : Optimize frequency response of all speakers to flat
response.
NOTE
Manual : Apply frequency response set with "Manual EQ" (vpage 44).
" MultEQ" and "Manual
OFF : The "MultEQ" equalizer cannot be used.
EQ" settings for which
W hen "Audyssey" , "Audyssey Byp. L/R" or "Audyssey Flat" is
"Not Used" has been set at
"EQ Customize" (vpage
selected, "
28) cannot be selected.
A fter running Audyssey Auto Setup, if the Speaker Configuration,
• When using headphones,
Distance, Channel Level, and Crossover Frequency have changed
"MultEQ" is set to "OFF" .
without increasing the number of speakers measured, only "
lights.
• This can also be set by pressing
Remote control
operation buttons
Default settings are underlined.
MultEQ
Dynamic EQ
Dynamic Volume
Setting
Setting contents
" lights.
.
Displaying the menu
: Moves the cursor (Up/Down/Left/Right)
:
Cancel the menu
Setting items
Dynamic EQ
ON : Use Dynamic EQ function.
OFF : Do not use Dynamic EQ function.
Audyssey Dynamic EQ solves
the problem of deteriorating
W hen set to "ON", "
sound quality as volume is
W hen "MultEQ" is set to "OFF" , "Dynamic EQ" is automatically set
decreased by taking into
to "OFF"
account human perception
T his can also be set by pressing
and room acoustics.
This can be set when the
"MultEQ" (vpage 43)
is set to anything other
than "OFF" .
NOTE
"Tone Control" is set to "OFF" when "Dynamic EQ" is set to "ON" .
Reference Level Offset : Audyssey Dynamic EQ takes the standard film
mixing level of 85 dB SPL during –20 dB FS input as its reference level.
However, since standardization is lacking outside the film industry, the
reference level of media contents may not be appropriate. In order to
view such contents, Reference Level Offset of Dynamic EQ has available
offsets of 5 dB, 10 dB and 15 dB.
0dB : Suitable for viewing movies.
5dB : Suitable for listening to classical music and other content mixed
at a high level.
10dB : Suitable for listening to jazz and other audio sources with a wide
dynamic range. Also suitable for viewing TV.
15dB : Suitable for listening to pop, rock music and other content with an
extremely wide dynamic range.
Setting is enabled when "Dynamic EQ" is "ON" .
Dynamic Volume
ON : Use Dynamic Volume. The Dynamic Volume effect will be at the level
of the "Setting" (vpage 44)
Audyssey Dynamic Volume
OFF : Do not use Dynamic Volume.
solves
the
problem
of
large variations in volume
• When set to "ON" , "
"
level
between
television
• When "MultEQ" is set to "OFF", "Dynamic Volume" is automatically
programs, commercials, and
set to "OFF".
between the soft and loud
• This can also be set by pressing
passages of movies.
This can be set when
"Dynamic EQ" (vpage
43) is set to "ON" .
: Decision the setting
Adjusting the Sound Field Effect (Parameter)
Setting contents
" is displayed.
.
Dynamic EQ / Volume : OFF
Dynamic EQ : ON/Volume : OFF
"Red"
"Off"
"Green"
"OFF"
" is displayed.
.
Dynamic EQ / Volume : ON
Dynamic EQ : ON / Volume : OFF
"Green"
"Red"
"Green"
"Red"
: Return to previous menu
ENGLISH
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-1610b - avr 1610 av receiver

Table of Contents