ENGLISH
Playback
n Operation Flow
B efore starting playback, make the connections between the
different components and the settings on the receiver.
Playing Components (vpage 34)
n
Playing Blu-ray Disc/DVD Players (vpage 34)
n
iPod® Playback (vpage 34)
n
Listening to FM/AM Broadcasts (vpage 36)
n
Operations During Playback (vpage 38)
Selecting the Surround Mode (vpage 39)
q Standard Playback (vpage 39)
w Playing in a DENON original surround mode
(vpage 40)
e Direct Playback (vpage 40)
r Stereo Playback (vpage 40)
Adjusting the Sound Field Effects (Parameter)
(vpage 41)
NOTE
Also refer to the operating instructions of the connected
●
components when playing them.
External devices can be controlled by remote control unit
●
(vpage 48 "Operating the Connected Devices by Remote
Control Unit").
34
Playing Components
Playing Blu-ray Disc / DVD Players
The following describes the procedure for playing Blu-ray disc/
DVD players.
Use the same procedure to play other components.
1
Prepare for playback.
①
T urn on the power of the TV, subwoofer
and player.
②
Set the TV's input to the AVR-1610.
③
Load the disc in the player.
2
Turn on the AVR-1610's power.
(vpage 16 "Turning the Power On")
3
Press
and select the input
source.
If "TUNING PRESET" is selected for preset
channel, press
before turning
4
Play the component connected to the AVR-1610.
Make the necessary settings on the player (language
setting, subtitles setting, etc.) beforehand.
5
Use
to adjust the volume.
H – – –
–80.5dB ~ 18.0dB
G
Variable range
※
The variable range differs according to the input signal and
channel level setting.
6
Select the desired surround mode.
(vpage 39 "Selecting the Surround Mode")
7
Adjust the desired sound fi eld effects.
(vpage 41 "Adjusting the Sound Field Effects")
iPod ® Playback
The music / video on an iPod can be played by using the control
dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold
separately).
Connect the control dock for iPod beforehand. (vpage 14
"iPod ® ").
Listening to music on an iPod ®
1
Prepare for playback.
q
Set the iPod in the DENON control
dock for iPod.
w
Assign the control dock for iPod's
input (vpage 31).
e
S witch
2
Turn on the AVR-1610's power.
(vpage 16 "Turning the Power On")
.
3
Press
to select the input
source assigned in step 1-
above.
b If the screens above are not
displayed, the iPod may not be
properly connected. Try connecting
again.
to "DEVICE".
w
OK to disconnect.
(iPod screen)
See overleaf