Listening To Fm/Am Broadcasts - Denon AVR-1610 Owner's Manual

ENGLISH

Listening to FM/AM Broadcasts

Basic Operation
1
Set to "TUNER/AMP".
2
Press to select "TUNER".
3
Press to select "FM" or "AM".
4
Tune in the desired broadcast
station.
q To tune in automatically (Auto Tuning)
Press to light the "AUTO" indicator on
the display, then use to select the
station you want to hear.
w To tune in manually (Manual Tuning)
Press to turn off the display's "AUTO" indicator, then use
to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
frequencies continuously.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at "On-Screen Display" (vpage 29).
3
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press .
3
Press to select the block (A to G)
in which the station is to be preset.
4
Press to select the preset number (1 to 8).
5
Press again to complete the setting.
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at menu "Auto Preset"
(vpage 33).
NOTE
Preset stations are erased by overwriting them.
to change
Listening to Preset Stations
1
to select the memory block (A to G).
Press
2
Press to select the desired preset channel (1 to
8).
n Default settings
Auto tuner presets
87 .5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
A1 ~ A8
90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 ~ B8
90.1 / 90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8 90.1 MHz
You can also operate via the main unit. In this
case, perform the following operations.
• Press , then turn on the main
unit to select the preset radio channel.
Playing Components