Specifications - Denon AVR-1610 Owner's Manual

ENGLISH

Specifications

n
Audio section
• Power amplifier
Rated output:
Output connectors:
• Analog
Input sensitivity / Input impedance:
Frequency response:
S/N:
n
Video section
• Standard video connectors
Input / output level and impedance:
Frequency response:
• Color component video connector
Input / output level and impedance:
Frequency response:
n
Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total harmonic Distortion (at 1 kHz):
n
General
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
n
Remote control unit (RC-1120)
Batteries:
Maximum external dimensions:
Weight:
z For purposes of improvement, specifications and design are subject to change without notice.
0
Front (A, B):
75 W+75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
75 W+75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
A or B 6～16 Ω/ohms
Front:
A + B 12～16 Ω/ohms
Center, Surround 6～16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
98 dB (IHF-A weighted, DIRECT mode)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +1, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P / C signal — 0.7 Vp-p, 75 Ω/ohms
B B
P / C signal — 0.7 Vp-p, 75 Ω/ohms
R R
5 Hz ~ 60 MHz — +0, –3 dB
[FM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10 W)
-15
87.5 MHz ~ 108.0 MHz 522 kHz ~ 1611 kHz
1.2 µV (12.8 dBf) 18 µV
MONO 2.0 µV (17.3 dBf)
STEREO 42 µV (34.5 dBf)
MONO 72 dB
STEREO 67 dB
MONO 0.3 %
STEREO 0.7 %
AC 230 V, 50 Hz
360 W
0.3 W (Standby)
434 (W) x 171 (H) x 377 (D) mm
9.2 kg
R03/AAA Type (two batteries)
50 (W) x 211 (H) x 22 (D) mm
110 g (including batteries)
[AM]