Connecting The Speakers - Denon AVR-590 Owner's Manual

ENGLISH
s Set the "Pre Assign" Mode According to the Speaker Layout.
The signals output from the AVR-590's SURR. BACK / FRONT HEIGHT PRE OUT connectors can be
switched to signals of the surround mode being used (vpage 24 "Pre Assign").
The speaker which plays the a
Pre Assign mode sound output from the SURR.
(vpage 24) BACK / FRONT HEIGHT PRE
OUT connectors
Normal
(Default)
b Connect to the SURR. BACK /
Normal
FRONT HEIGHT PRE OUT "L"
connector.
b Set "S.Back (Pre out)" (vpage
25) to "1ch".
Normal
b Set the "S.Back (Pre out)" setting
(vpage 25) to "None" .
Front Height

Installing/Setting the Speakers
Example of speaker installation
Surround back
speakers
Surround back
speakers
Not connected
S.Back (Pre out)" setting " setting
Front Height
speakers

Connecting the Speakers

Subwoofer with Front
builtin amplifier speakers
(L)
w q w
(7.1)
(6.1)
R
Power amplifier
(5.1)
w q w q
Front Height
(7.1)
speakers
(L) (R)
Center
speaker
w q
(R)
q
L
To play surround back speakers or front height speakers,
connect a power amplifier to the AVR-590's SURR. BACK /
FRONT HEIGHT PRE OUT connectors.
Make the "Pre Assign" (vpage 24) settings.
Surround back
or
speakers
Surround
speakers
(L) (R)
w q w q