Anonymous Call Block; Access Code Prefix; Directory; Phone Book - Fortinet FON-350i User Manual

Anonymous Call Block

The FON-350i phone can block incoming calls with an anonymous caller ID.
To enable/disable Anonymous Call Blocking:
• Press the
• Press the On softkey to enable or press the Off softkey to disable Anonymous Call Blocking.
• Press the Back softkey or the

Access Code Prefix

The FON-350i phone can automatically prepend digits* to a phone number dialed from the
Missed Calls log, Received Calls log or Phone Book. For example, you should program a Hunt
Group (ie. 9) if you normally dial
from the Call Logs or Phone Book are properly dialed out of the system.
To program an Access Code:
• Press the
• Enter the digits that need to be prepended to all numbers dialed
from the Call Logs or Phone Book.
• Press the OK softkey when complete.
If you use Direct Line Access (No Hunt Group required to place calls), then nothing needs to
be programmed.
* There is a configurable parameter in the web interface under Call Preferences to change the
length of a number dialed before the phone will insert the Access Code. The default length
is 6. Any numbers stored in a log or phone book will have the Access Code prepended if 6 or
more digits in length.

Directory

Phone Book

The phone supports 80 contacts that can be entered via the phone or via the web interface.
Each contact can have a ring type assigned. When a call is received from the contact, the
specified ring signal is used to override the default ring type.
The Phone Book menu is accessed through the LCD menu or when assigned, a Phone Book
flexible button. From the Phone Book menu, records may be added, edited, deleted or
searched.
Fortinet Technologies Inc.
button, then select 4. Call Preferences, then 7. Anonymous Call Block.
button to exit the menu.
L
to reach an outside line. This will ensure that calls placed
button, then select 4. Call Preferences, then 8. Access Code Prefix.
Page 30 FON-350i Telephone User Guide