Functions; Ring Settings; User Define Rings (Rtttl) - Fortinet FON-350i User Manual

• Key Tone: enables or disables the tone generated when a button on the phone is pressed.
• End of Digit: A digit can be specified for terminating a dialing string. # is the default.
• Backlight: Set the duration that the backlight will remain on after any interaction with the
phone.

Functions

• Download Flag: Enables the visibility of the S/W and configuration download flags functions
under the LCD Configuration menu.
• One-touch Pickup: When enabled, pressing a line button will connect the call to the
speakerphone or headset. If One-touch Pickup is disabled, the phone will instead display
the call status when a line button is pressed. The call does not connect to the speakerphone
or handset unless the button is pressed a second time.
• Display DTMF: If disabled, digits entered after a call is placed will not appear. This is useful
for security purposes where a PIN code or Access Code is required to gain access to
external lines or features.

Ring Settings

• Ringer Type: Sets the default ring type from one of 14 ring signals.
• Ringer: Set to On to enable the ringer or Off for no ring. The phone will still show Caller ID
and flash the LED light associated to the line.

User Define Rings (RTTTL)

• Add and delete user-defined rings (RTTTL text format). The Browse button can be used to
find and upload an RTTTL file for use. The RTTTL file must be uploaded before it can be
assigned for use as the Ring Type. Up to five (5) RTTTL ring types, no greater than 512
characters, may be stored in the phone. Do not change this value if you do not understand
the settings.
To modify Phone Setting parameters:
• Select the parameter.
• Enter the new value or select a value from the drop-down menu.
• When complete, press the Save button.
Changing DTMF Payload, Frame Duration or DTMF Relay requires a reboot of the phone.
Fortinet Technologies Inc. Page 53 FON-350i Telephone User Guide