Setting A Loop Tempo For Recording - DigiTech JAMMAN Manual

Setting a Loop Tempo for Recording

Before you begin recording a phrase, you may want to set a tempo at which
you want to record the loop at. Setting the tempo in an empty loop memory
location automatically starts playing the rhythm guide track (Rhythm Level
must be turned up to hear it). You can use the rhythm guide track as a
metronome for recording against to help keep a consistent tempo of your
performance. To set the tempo for recording, follow these steps:
1. Select an empty loop memory location (LOOP and SINgLE LEDs are off).
2. Tap the TEMPO button or STOP/TEMPO footswitch at least twice. The TEMPO
button will flash at the tempo that has been tapped.
3. Turn up the RHYTHM LEVEL (if it hasn't been already) to hear the rhythm
guide track.
4. Begin recording by pressing the REC/PLaY/OVERDUb footswitch.
If you want to set up a memory location with a tempo but not record to it,
you can just follow steps 1-3, but you must store the newly set tempo using
the Store procedure (see page 22). When you return to the empty loop
location, the tempo will already be set and the rhythm guide track will begin
playing automatically.
23