Delay Tap Tempo - DigiTech iStomp Owner's Manual

Delay Tap Tempo

In some of the delay pedals that the iStomp can be programmed with, the footswitch can be
used as a tap tempo switch for setting the delay time during a live performance.Tap the INFO
button to see which delay pedals supportTapTempo.To enable theTapTempo function,
follow these steps:
1. Press and hold the Footswitch for at least 2 seconds.The Indicator LED
will first light solid showing that the delay effect has been turned on and then it
will begin flashing.The flashing indicates Tap Tempo mode is now active and the
Indicator LED will flash at the current delay time's duration.
2. Tap the Footswitch at least two times to set a new delay time.The last two pedal
tap intervals set the delay time.While Tap Tempo is active, the TIME knob can be
used as a multiplier selector. A multiplier changes the repeat rate by a fixed multiple
of the tap interval.There are three multiplier settings across the range of the knob.
13