Audio Tones - Xerox DocuColor 6060 Operator's Manual

Audio Tones

6 06 0
D O C U C O L O R O P E R A T O R M A N U A L
There are three audio tones:
• Attention:
The Attention Tone sounds six seconds after a scan job has been
completed to remind you to remove the document from the Scanner
glass.
• Button Selection:
A single tone indicates that the button you pressed can be selected. A
double tone indicates that the button is not available.
• Fault:
The Fault Tone indicates that the digital press is in a fault condition and
will not operate until the fault is cleared.
The Audio Tones can be deactivated or made louder or softer through the Tools
Mode. For more information, refer to the System Administration Guide.
O
V E R V I E W
2-29