Document Glass; Document Cover Belt - Xerox DocuColor 6060 Operator's Manual

O
V E R V I E W

Document Glass

2- 3 2

Document Cover Belt

1
Lift the DADF and place the original face down in the upper-left corner using the
same orientation as the paper in the selected paper tray; Long Edge Feed (LEF) on
the glass if the paper in the tray is LEF and Short Edge Feed (SEF) on the glass if
the paper in the tray is SEF.
CAUTION:
When copying a bound document, DO NOT apply excessive force
to close the cover or DADF.
2
Lower the cover or DADF.
3
Press the Start button to begin the scan operation.
The maximum scanned image size is 11 x 17 inches or A3. To copy an image of
this size onto 12 x 17.7 inch or SRA3 paper, you must select 102& enlargement.
Refer to the Paper and Paper Trays chapter of this manual for more information
on programming the system for the various paper sizes.
Figure 23. Document on the Glass
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L