Your Xerox service representative uses the Service Engineer Replaceable Unit function to check
on the status items that are replaced only by the service engineer.
These items include the fuser oil and the second bias transfer belt.
Help
Press Help for an overview of the different options displayed in the various tabs on the UI.
Audio Tones
There are three audio tones:
•
Attention:
The Attention Tone sounds six seconds after a scan job has been completed to remind you
to remove the document from the Scanner glass.
•
Button Selection:
A single tone indicates that the button you pressed can be selected. A double tone
indicates that the button is not available.
•
Fault:
The Fault Tone indicates that the digital press is in a fault condition and does not operate
until the fault is cleared.
The Audio Tones can be deactivated or made louder or softer through the Tools Mode. For more
information, refer to the System Administration Guide.
12-4
DocuColor 7002/8002
User Guide