Tabbed Inserts - Xerox DocuColor 6060 Operator's Manual

Tabbed Inserts

6 06 0
D O C U C O L O R O P E R A T O R M A N U A L
Tabbed Inserts can be loaded into the paper trays as Non-Standard paper.
• When loading, the non-tabbed, short edge of the tabbed insert should be the
lead edge to the digital press.
• If a jam occurs while running tabbed sets, there is no recovery procedure.
• You have to manually reassemble your originals and prints, determine
where the job left off, and resume printing or cancel the job and start
again.
• The size of the tabbed insert should be 9 x 11 inch (229 x 279 mm) for letter
size tabs (223.5 x 296 mm for A4 equivalent tabs).
• The correct weight of the insert should be selected on the tray.
• Select Non-Standard size on the paper tray and on the Touch Screen, Tools
Mode, input 11 inches or 296 mm for A4 as the X axis and 9 inches or 223.5
mm for A4 as the Y axis dimensions for SEF.
Refer to the System Administration Guide for the procedure to program non-
standard size paper.
P P T
A P E R A N D A P E R R A Y S
3-7