High Capacity Stacker; Identifying The Parts - Xerox DocuColor 6060 Operator's Manual

High Capacity Stacker

Identifying the Parts

D C 6 0 60 O
O C U O L O R P E R A T O R
The High Capacity Stacker (HCS) is an optional finishing device that provides
stacking and offsetting capabilities for output to the Stacker Tray. The HCS
connects to the right end of the digital press and replaces the Offset Catch Tray
on the press.
The Stacker Tray has a capacity of 3500 sheets of 90 g/m
uncoated paper. You can select the Offset mode when sets are sent to the
Stacker Tray. This provides offset separation between the stacked sets. The HCS
can also send documents to the Top Tray. The Top Tray has a capacity of 250
2
sheets of 90 g/m paper.
If needed, you can purchase an optional second Stacker Cart. Contact your Xerox
representative for further details.
Control Panel
Left Side
Docking plate to
digital press
Figure 7. High Capacity Stacker
M
A N U A L
Top Tray
Back
Front
A
C C E S S O R I E S
2
(24 lb.) coated or
Right Side
Front Door
access to
Stacker Cart
5-9