Ordering And Loading Staples - Xerox DocuColor 6060 Operator's Manual

Ordering and Loading Staples

D C 6 0 60 O
O C U O L O R P E R A T O R
You can order new staple cartridges through the system you normally use for
ordering Xerox supplies. The cartridge number to order is 8R12799. You should
keep a supply on hand so production is not interrupted while you are waiting for
staples to be shipped.
2
1
1
Open the front door of the High Capacity Stacker Stapler.
2
Push the yellow (1) lever down with your left hand. Grasp the grey handle on the
cartridge unit and pull it towards you until it stops. Release the yellow level and
the unit will lock into place.
3
Grasp the yellow staple cartridge and pull it towards you. The entire unit will
move forward, then the staple cartridge only will pull free of the unit.
4
Insert a new cartridge into the unit, and push it until you hear it click into place.
5
Push the yellow lever down and the cartridge unit automatically swings back into
place.
M
A N U A L
Figure 47. Staple Cartridge
A
C C E S S O R I E S
Grey
Handle
5-61