Table of Contents
Advertisement
C
H A P T E R
17.1 Overview
This chapter explains how to configure the TR-069 settings and access control
settings on the ZyXEL Device.
17.1.1 What You Can Do in this Chapter
• The TR-069 screen lets you configure the ZyXEL Device's TR-069 auto-
configuration settings
• The TR-064 screen lets you enable management via TR-064 on the ZyXEL
Device
(Section 17.3 on page
• The Service Control screens let you configure through which interface(s) users
can use which service(s) to manage the ZyXEL Device
182).
• The IP Address screens let you configure from which IP address(es) users can
use a service to manage the ZyXEL Device
17.2 The TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your ZyXEL
Device, can be managed over the WAN by an Auto Configuration Server (ACS).
TR-069 is based on sending Remote Procedure Calls (RPCs) between an ACS and a
client device. RPCs are sent in Extensible Markup Language (XML) format over
HTTP or HTTPS.
An administrator can use an ACS to remotely set up the ZyXEL Device, modify
settings, perform firmware upgrades as well as monitor and diagnose the ZyXEL
Device. You have enable the device to be managed by the ACS and specify the
ACS IP address or domain name and username and password.
P-870H/HW Series User's Guide
Remote Management
(Section 17.3 on page
181)
17
181).
(Section 17.4 on page
(Section 17.5 on page
183).
179
Advertisement
Table of Contents
